-
XPlanar
Maximum positioning flexibility with six degrees of freedom
> Article as PDF
-
Empa, Switzerland
TwinCAT OPC UA connects research and innovation infrastructure on Empa campus
> Article as PDF
Latest contents | products
-
CX7000 Embedded PC: The new entry-level class with 400 MHz processor and integrated multi-functional I/Os
The CX7000 Embedded PC opens up the convenience and efficiency of the TwinCAT 3 software environment to compact controllers. This further enhances the scalability of PC-based control technology from Beckhoff – ranging from mini-PLCs to many-core Industrial PCs. An advanced 400 MHz processor and built-in configurable I/Os mean the Embedded PC delivers an optimum price/performance ratio. > Article as PDF -
C6032: high-performance and modular ultra-compact Industrial PC
The C6032 Industrial PC with dimensions of only 129 x 133 x 104 mm extends the range of ultra-compact Industrial PCs by a high-performance modular device. For this purpose, the C6032 adds a further circuit board level to the C6030 single-board Industrial PC to accommodate modular interface and functional extensions. > Article as PDF -
Connectors for One Cable Automation now available in size B40
The connector families ENP and ECP, which were developed for One Cable Automation (OCA) solutions with elevated power requirements, combine EtherCAT or EtherCAT P with additional power cores in the cable. The range of previously available sizes, B12 to B36, has recently been expanded with the B40 connectors (16 mm² wire cross-section). > Article as PDF -
CX5230/CX5240: compact and modular Embedded PC series with the latest Intel® Atom™ processors
The DIN-rail-mountable, fanless Embedded PCs in the CX5200 series are equipped with Intel® processors of the Atom™ X series. The series encompasses two devices that differ by processor type and RAM. > Article as PDF -
EL2634: relay outputs with extremely high switching capability
The output terminal EL2634 is equipped with four relays, each of which has a single contact, and with potential-free contacts. The relay contact is suitable for use at up to 250 V AC or 30 V DC. > Article as PDF -
EL2596: flexible and highly precise LED strobe control for vision applications
The LED driver terminals from the EL2596 series contain a flexible power supply unit that supplies the LED with the required voltage and current. The terminals support applications from constant lighting to short light pulses in the kHz range. > Article as PDF -
AM87xx: anodised servomotors in Hygienic Design
The anodised servomotors from the AM8700 series combine the advantages of the highly dynamic AM8000 standard servomotors with features to meet the requirements of the packaging and food industries. Like the AM8800 series motors, the AM8700 motors meet hygienic design requirements and are therefore suitable for use in the food, pharmaceutical and chemical industries. > Article as PDF -
CU81xx: New UPS series with communication capability
With the new CU81xx UPS series, all Beckhoff components can be safeguarded. A special feature of the UPS series is its compatibility and ability to communicate with all existing Industrial, Panel and Embedded PCs. > Article as PDF -
Tubular motor: precise and dynamic linear movement without additional mechanical drive components
The ironless tubular motor AA2518 is able to perform extremely smooth translatory movements (up to 600 mm), because no cogging occurs, and does not require further mechanical components for power transmission such as e.g. a spindle or gear rack. > Article as PDF -
TwinCAT: XTS Extension expanded with Track Management functionality
The TwinCAT library TC3 XTS Extension has been expanded with the Track Management software functionality for the eXtended Transport System (XTS). It enables the combination of a virtually unlimited number of tracks in varying length. In this way it is possible to move motor modules, i. e. track sub-sections between different XTS tracks by means of customer-specific mechanical devices. In addition, the switch between different tracks is possible without having to interrupt system operation. > Article as PDF -
AMP8620: IP 65 supply module expands the AMP8000 distributed Servo Drive system
The AMP8000 distributed Servo Drive system provides ideal support for the implementation of modular machine concepts. With the new AMP8620 supply module in a high protection rating, the entire system can now be relocated directly to the machine, i.e. through consistent decentralization, drive technology can be implemented entirely without control cabinets. That means maximum possible savings on material, space, costs and assembly work. > Article as PDF -
TwinCAT Scope meets OPC UA
In the context of Industrie 4.0 and big data applications, machine data acquisition is becoming increasingly important. The information must be presented in a clear and efficient manner, and the machine control system also has to cover a wide range of other smart components. TwinCAT Scope software provides optimum support for such integrated data acquisition across heterogeneous system environments. > Article as PDF
Latest contents | worldwide
-
IWS, Germany: Productivity increase for laser material machining applications
The Fraunhofer-Institut für Werkstoff- und Strahltechnik (IWS) Dresden (Fraunhofer Institute of Material and Beam Technology) carries out research and development work in the fields of laser and surface technologies. In one application for high-speed laser material machining, the process was optimized using technologies from Beckhoff. Moreover, Fraunhofer IWS Dresden has developed its own EtherCAT module. > Article as PDF -
Fortna and Journeys, USA: Fortna expands warehouse capabilities in logistics center with PC-based control
To keep up with the continuing rise in online sales, retailers must design better websites, expand their shipping capacities and optimize their logistics processes. This challenge is very familiar to U.S.-based retailer Journeys, which specializes in footwear from brands that are popular with young adults, such as Adidas, Fila, Converse and Vans. Together with its partner Fortna, Journeys recently upgraded its distribution center with PC-based control technology. > Article as PDF -
ETNZ, New Zealand: Emirates Team New Zealand relies on PC-based control and EtherCAT in America’s Cup contest
PC- and EtherCAT-based control technology on the ETNZ boat proved to be a crucial aid for fast, precise trimming – the process of tuning the hydrofoils and the wing sail’s position and profile to suit the wind, course and swell. Beckhoff is now on board as an official supplier for the team’s title defense bid. > Article as PDF -
Ecmec, Sweden: TwinCAT 3 controls highly efficient machine for processing of die-cast automotive parts
Swedish equipment manufacturer Ecmec AB has developed a high-tech machine for a supplier to the automobile industry that can complete several process steps simultaneously without having to remount the part being worked on. The machining center is designed for high-volume production of up to 200,000 parts per year and performs its functions and processing steps simultaneously within the same cycle. The machine reduces the previous processing and conversion times by more than one third, while requiring less of the valuable shop floor space with its reduced footprint. > Article as PDF -
IMT, France: 3D printing – making an architect’s dreams come true
A wide variety of different research projects are being carried out in partnership with industry at the Institute Mines Télécom (IMT) Lille-Douai. The university is currently researching the use of 3D printing for the construction industry and is taking a decisive step towards the introduction of Industrie 4.0 into the construction sector. The aim is to produce components of any shape according to digital construction plans in 3D printing. The additive production not only enables economical production in lot size 1, it is also fast and saves valuable resources. > Article as PDF