A growing family: A new, compact Industrial PC supplements the Control Cabinet PC series C6200
As the 4th member of the family, the C6210 supplements the C6200 Control Cabinet PC series. This series of Industrial PCs has been developed for small control cabinets. It has been fitted with telescopic rails, so that the computers can be pulled out in order to fit plug-in cards. All components can therefore be accessed quickly. Because the connections are to the front, the space needed to fit it is very small, allowing best possible use of the available room.

There are four different housing sizes to suit the available fitting space, so that the appropriate member of the PC range can be chosen for each application. The new C6210 is the smallest version of the C6200 series. With dimensions of 257 x 170 x 284 mm, the PC can be fitted into remarkably small spaces. Weighing 9.5 kg, the PC in its 4-slot housing is fitted with an Intel Celeron or Pentium III processor running at up to 850 MHz on a PISA plug-in card motherboard on a passive backplane. One ISA and one combined ISA/PCI slot for cards up to 190 mm long are available. The basic version includes a floppy drive. Optionally, this can be replaced by a slim-line CD-ROM drive. Further features are an on-board graphic adapter, a 2 1/2 inch IDE hard drive with a capacity of 10 GB, along with 64 MB of RAM that can be increased up to 512 MB. The interface to the outside is provided by an on-board Ethernet adapter having 10/100 Base-T connection. Two serial RS232 connections, two USB ports and a parallel interface complete the Control Cabinet PC. Available options include fieldbus interface cards, other interface cards and modem or ISDN adapters. CP-Link interface cards provide straightforward connection to the Beckhoff Control Panel.
Back to overview