with pluggable wiring
The Beckhoff Bus Terminal system has been expanded with a pluggable connection feature. The assembly and wiring procedure for the new KS series is the same as for the KL series. The complete KL series with all 180 functions will be made available in KS configuration.
The KS series Bus Terminals enable the complete wiring to be removed as a plug connector from the top of the housing for servicing. The lower section can be removed from the Bus Terminal assembly by pressing the unlocking tab. Insert the new component and plug in the connector with the wiring. This reduces the installation time and eliminates the risk of wires being mixed up.
The familiar dimensions of the Bus Terminal only had to be changed slightly. Bus Terminal series KS with pluggable wiring The new connector adds about 3 mm. The maximum height of the Bus Terminal remains unchanged. Bus Terminals from the KL and KS series can be mixed and matched without restriction.
Properties| | | all 8 connection wires on a single connector |
| | | full compatibility between KL series and new KS series |
| | | small fitting dimensions |
| | | all Bus Terminal functions available with connector |
| | | no additional installation steps for the connector |
| | | modules can be swapped without tools |
| | | optional coding for the connector level |
| | | cables are attached with cable ties |
